Support for Tonex Plug

[bytearray88]

Is it possible to use this repo to switch presets in the Tonex Plug via BLE? Looks like the Plug does not allow this via USB. I need this feature and was about to start working on it until I came across your repo. I do not want to re-invent the wheel, happy to contribute if the repo does not yet talk to the Plug. Cheers.

[Builty]

Hi. I'm curently working on adding support for the One Plus, and I've been looking at the data comms for both USB and over BT with the app.
The data is actually the same in both cases.
Seeing as both the Plug and the Plus use the same app, I'm guessing that the comms is very similar or possibly even the same.
It probably has its own USB PID to identify it.

I would expect that changing presets over USB is possible, as that is achievable via the Tonex Editor. This controller, for the Plus, uses "set preset in slot" and "set active slot" messages to achieve preset switching.

Did you want to clone the OnePlusDev branch and see if it works with the Plug?
Check out the usb_comms.c file, where I check the USB PID/VID to work out which device it is, and load the corresponding driver. Maybe the Plug can share the Plus driver.