configuring eeprom

[rudehardware]

Firmware OK
Maksim Kryukov aka Fagear
ATmega tape transport controller
v0.14 [May 27 2026, 21:34:22]

Selected tape transport: Tanashin TN-21ZLG clone mechanism (M60207052)

Tacho monitor in STOP: DISABLED
Reverse operations: DISABLED

Playback buttons/LEDs: ONE
Record starting: PLAY+REC
Auto-reverse (A-B-stop): DISABLED
Auto-reverse (loop): DISABLED
Auto-rewind after PLAY: DISABLED
Auto-rewind after FF: DISABLED

Current TTR mode: STOP, req'd target mode: TO_INIT
Capstan started
Performing start-up delay...
MODE|>t240<|u0}1>4|0x00
MODE|>t239<|u0}1>4|0x00
MODE|>t238<|u0}1>4|0x04
MODE|>t237<|u0}1>4|0x04
MODE|>t236<|u0}1>4|0x04
.....
MODE|>t001<|u0}1>4|0x1f
Mode transition done: ->STOP

how to enable disabled feature in the eeprom?
thanks

[Fagear]

It's done via writing EEPROM image with set configuration via programmer.
Please refer to https://github.com/Fagear/AVRTapeControl#configurable-service-features section.
You can try to construct EEPROM image yourself or use provided command line utility.