diff --git a/arch/arm64/boot/dts/qcom/shikra-cqm-evk.dts b/arch/arm64/boot/dts/qcom/shikra-cqm-evk.dts index d1cc3ec70040..b84dd48148b8 100644 --- a/arch/arm64/boot/dts/qcom/shikra-cqm-evk.dts +++ b/arch/arm64/boot/dts/qcom/shikra-cqm-evk.dts @@ -22,6 +22,65 @@ chosen { stdout-path = "serial0:115200n8"; }; + + lcd_bias: regulator-lcd-bias { + compatible = "regulator-fixed"; + regulator-name = "lcd_bias"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&pm4125_l17>; + gpio = <&tlmm 151 GPIO_ACTIVE_HIGH>; + enable-active-high; + pinctrl-0 = <&lcd_bias_en>; + pinctrl-names = "default"; + }; +}; + +&mdss { + status = "okay"; +}; + +&pm4125_l5 { + /* DSI VDDA - must be at NOM voltage for PHY PLL lock */ + regulator-min-microvolt = <1232000>; + regulator-max-microvolt = <1232000>; + regulator-allow-set-load; +}; + +&mdss_dsi0 { + vdda-supply = <&pm4125_l5>; + status = "okay"; + + panel@0 { + compatible = "dlc,dlc0697"; + reg = <0>; + + reset-gpios = <&tlmm 3 GPIO_ACTIVE_LOW>; + backlight-en-gpios = <&tlmm 91 GPIO_ACTIVE_HIGH>; + + vddi-supply = <&pm4125_l15>; + avdd-supply = <&lcd_bias>; + avee-supply = <&lcd_bias>; + + pinctrl-0 = <&panel_rst_n &panel_te_pin>; + pinctrl-1 = <&panel_rst_n_suspend>; + pinctrl-names = "default", "sleep"; + + port { + panel_in: endpoint { + remote-endpoint = <&mdss_dsi0_out>; + }; + }; + }; +}; + +&mdss_dsi0_out { + remote-endpoint = <&panel_in>; + data-lanes = <0 1 2 3>; +}; + +&mdss_dsi0_phy { + status = "okay"; }; &audiocorecc { @@ -84,3 +143,33 @@ status = "okay"; }; + +&tlmm { + lcd_bias_en: lcd-bias-en-state { + pins = "gpio151"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + panel_rst_n: panel-rst-n-state { + pins = "gpio3"; + function = "gpio"; + drive-strength = <8>; + bias-disable; + }; + + panel_rst_n_suspend: panel-rst-n-suspend-state { + pins = "gpio3"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + panel_te_pin: panel-te-pin-state { + pins = "gpio86"; + function = "mdp_vsync_p"; + drive-strength = <2>; + bias-pull-down; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/shikra-cqs-evk.dts b/arch/arm64/boot/dts/qcom/shikra-cqs-evk.dts index 5868992f387c..1c16f228993c 100644 --- a/arch/arm64/boot/dts/qcom/shikra-cqs-evk.dts +++ b/arch/arm64/boot/dts/qcom/shikra-cqs-evk.dts @@ -22,6 +22,65 @@ chosen { stdout-path = "serial0:115200n8"; }; + + lcd_bias: regulator-lcd-bias { + compatible = "regulator-fixed"; + regulator-name = "lcd_bias"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&pm4125_l17>; + gpio = <&tlmm 151 GPIO_ACTIVE_HIGH>; + enable-active-high; + pinctrl-0 = <&lcd_bias_en>; + pinctrl-names = "default"; + }; +}; + +&mdss { + status = "okay"; +}; + +&mdss_dsi0 { + vdda-supply = <&pm4125_l5>; + status = "okay"; + + panel@0 { + compatible = "dlc,dlc0697"; + reg = <0>; + + reset-gpios = <&tlmm 3 GPIO_ACTIVE_LOW>; + backlight-en-gpios = <&tlmm 91 GPIO_ACTIVE_HIGH>; + + vddi-supply = <&pm4125_l15>; + avdd-supply = <&lcd_bias>; + avee-supply = <&lcd_bias>; + + pinctrl-0 = <&panel_rst_n &panel_te_pin>; + pinctrl-1 = <&panel_rst_n_suspend>; + pinctrl-names = "default", "sleep"; + + port { + panel_in: endpoint { + remote-endpoint = <&mdss_dsi0_out>; + }; + }; + }; +}; + +&mdss_dsi0_out { + remote-endpoint = <&panel_in>; + data-lanes = <0 1 2 3>; +}; + +&mdss_dsi0_phy { + status = "okay"; +}; + +&pm4125_l5 { + /* DSI VDDA - must be at NOM voltage for PHY PLL lock */ + regulator-min-microvolt = <1232000>; + regulator-max-microvolt = <1232000>; + regulator-allow-set-load; }; &audiocorecc { @@ -75,6 +134,10 @@ }; }; +&usb_qmpphy_out { + remote-endpoint = <&pm4125_ss_in>; +}; + &wifi { vdd-0.8-cx-mx-supply = <&pm4125_l7>; vdd-1.8-xo-supply = <&pm4125_l13>; @@ -85,3 +148,33 @@ status = "okay"; }; + +&tlmm { + lcd_bias_en: lcd-bias-en-state { + pins = "gpio151"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + panel_rst_n: panel-rst-n-state { + pins = "gpio3"; + function = "gpio"; + drive-strength = <8>; + bias-disable; + }; + + panel_rst_n_suspend: panel-rst-n-suspend-state { + pins = "gpio3"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + panel_te_pin: panel-te-pin-state { + pins = "gpio86"; + function = "mdp_vsync_p"; + drive-strength = <2>; + bias-pull-down; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/shikra.dtsi b/arch/arm64/boot/dts/qcom/shikra.dtsi index 7b78dfcad298..5f460df42291 100644 --- a/arch/arm64/boot/dts/qcom/shikra.dtsi +++ b/arch/arm64/boot/dts/qcom/shikra.dtsi @@ -6,6 +6,7 @@ #include #include #include +#include #include #include #include @@ -2245,6 +2246,204 @@ #power-domain-cells = <1>; }; + mdss: display-subsystem@5e00000 { + compatible = "qcom,shikra-mdss", "qcom,qcm2290-mdss"; + reg = <0x0 0x05e00000 0x0 0x1000>; + reg-names = "mdss"; + interrupts = ; + interrupt-controller; + #interrupt-cells = <1>; + + clocks = <&gcc GCC_DISP_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>; + clock-names = "iface", + "bus", + "core"; + + resets = <&dispcc DISP_CC_MDSS_CORE_BCR>; + + power-domains = <&dispcc MDSS_GDSC>; + + iommus = <&apps_smmu 0x420 0x2>; + interconnects = <&mmrt_virt MASTER_MDP_PORT0 RPM_ALWAYS_TAG + &mc_virt SLAVE_EBI_CH0 RPM_ALWAYS_TAG>, + <&mem_noc MASTER_AMPSS_M0 RPM_ALWAYS_TAG + &config_noc SLAVE_DISPLAY_CFG RPM_ALWAYS_TAG>; + interconnect-names = "mdp0-mem", + "cpu-cfg"; + + #address-cells = <2>; + #size-cells = <2>; + ranges; + + status = "disabled"; + + mdp: display-controller@5e01000 { + compatible = "qcom,shikra-dpu", "qcom,qcm2290-dpu"; + reg = <0x0 0x05e01000 0x0 0x8f000>, + <0x0 0x05eb0000 0x0 0x3000>; + reg-names = "mdp", + "vbif"; + + interrupt-parent = <&mdss>; + interrupts = <0>; + + clocks = <&gcc GCC_DISP_HF_AXI_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>, + <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>, + <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + clock-names = "bus", + "iface", + "core", + "lut", + "vsync"; + + operating-points-v2 = <&mdp_opp_table>; + power-domains = <&rpmpd QCM2290_VDDCX>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dpu_intf1_out: endpoint { + remote-endpoint = <&mdss_dsi0_in>; + }; + }; + }; + + mdp_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-19200000 { + opp-hz = /bits/ 64 <19200000>; + required-opps = <&rpmpd_opp_min_svs>; + }; + + opp-192000000 { + opp-hz = /bits/ 64 <192000000>; + required-opps = <&rpmpd_opp_low_svs>; + }; + + opp-256000000 { + opp-hz = /bits/ 64 <256000000>; + required-opps = <&rpmpd_opp_svs>; + }; + + opp-307200000 { + opp-hz = /bits/ 64 <307200000>; + required-opps = <&rpmpd_opp_svs_plus>; + }; + + opp-384000000 { + opp-hz = /bits/ 64 <384000000>; + required-opps = <&rpmpd_opp_nom>; + }; + }; + }; + + mdss_dsi0: dsi@5e94000 { + compatible = "qcom,shikra-dsi-ctrl", + "qcom,qcm2290-dsi-ctrl", + "qcom,mdss-dsi-ctrl"; + reg = <0x0 0x05e94000 0x0 0x400>; + reg-names = "dsi_ctrl"; + + interrupt-parent = <&mdss>; + interrupts = <4>; + + clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>, + <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>, + <&dispcc DISP_CC_MDSS_PCLK0_CLK>, + <&dispcc DISP_CC_MDSS_ESC0_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>; + clock-names = "byte", + "byte_intf", + "pixel", + "core", + "iface", + "bus"; + + assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, + <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>; + assigned-clock-parents = <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>, + <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>; + + operating-points-v2 = <&dsi_opp_table>; + power-domains = <&rpmpd QCM2290_VDDCX>; + phys = <&mdss_dsi0_phy>; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + + dsi_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-19200000 { + opp-hz = /bits/ 64 <19200000>; + required-opps = <&rpmpd_opp_min_svs>; + }; + + opp-164000000 { + opp-hz = /bits/ 64 <164000000>; + required-opps = <&rpmpd_opp_low_svs>; + }; + + opp-187500000 { + opp-hz = /bits/ 64 <187500000>; + required-opps = <&rpmpd_opp_svs>; + }; + }; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + mdss_dsi0_in: endpoint { + remote-endpoint = <&dpu_intf1_out>; + }; + }; + + port@1 { + reg = <1>; + mdss_dsi0_out: endpoint { + }; + }; + }; + }; + + mdss_dsi0_phy: phy@5e94400 { + compatible = "qcom,dsi-phy-14nm-2290"; + reg = <0x0 0x05e94400 0x0 0x100>, + <0x0 0x05e94500 0x0 0x300>, + <0x0 0x05e94800 0x0 0x188>; + reg-names = "dsi_phy", + "dsi_phy_lane", + "dsi_pll"; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&rpmcc RPM_SMD_XO_CLK_SRC>; + clock-names = "iface", + "ref"; + + power-domains = <&rpmpd QCM2290_VDDMX>; + required-opps = <&rpmpd_opp_nom>; + + #clock-cells = <1>; + #phy-cells = <0>; + + status = "disabled"; + }; + }; + dispcc: clock-controller@5f00000 { compatible = "qcom,shikra-dispcc", "qcom,qcm2290-dispcc"; reg = <0x0 0x05f00000 0x0 0x20000>; @@ -2252,8 +2451,8 @@ <&rpmcc RPM_SMD_XO_A_CLK_SRC>, <&gcc GCC_DISP_GPLL0_CLK_SRC>, <&gcc GCC_DISP_GPLL0_DIV_CLK_SRC>, - <0>, - <0>, + <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>, + <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>, <0>, <0>, <&sleep_clk>; diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig index eb14dee94d3d..e3bd5a8d2d47 100644 --- a/arch/arm64/configs/defconfig +++ b/arch/arm64/configs/defconfig @@ -943,6 +943,7 @@ CONFIG_DRM_SUN8I_MIXER=m CONFIG_DRM_MSM=m CONFIG_DRM_TEGRA=m CONFIG_DRM_PANEL_BOE_TV101WUM_NL6=m +CONFIG_DRM_PANEL_ILITEK_ILI7807S=m CONFIG_DRM_PANEL_LVDS=m CONFIG_DRM_PANEL_SIMPLE=m CONFIG_DRM_PANEL_EDP=m