A simple no bloatware Mod Pack to easily and seamlessly jailbreak your Nintendo Switch.
This is a simple and bare bone mod pack with no bloatware whats so ever. I will try to keep this up to date as any of its contents get updated.
Keep in mind it is always best to follow the Switch Modding Guide and do everything yourself.
- Hekate-Nyx
- Atmosphere
- Sys-Patches
- LockPickRCM
- exosphere.ini
- DNS-MITM
- Homebrew:
Details
Install the latest release of the ModPack from here.
Open SD Card on PC and format it (backup Nintendo Folder if you have one)
Now in the empty SD Card move the contents of "Before" folder inside.
It should look like this
After this unplug your SD card from the PC, shutdown your switch and put it in your switchs SD slot
Run the Tegra RCM Installer setup in the zip folder.
once installed, open Tegra RCM and go to settings tab and click install Driver
After that, go to payload tab and load the Hekate Payload in the zip
Put an RCM Jig on the right Joycon Rail and Load into RCM Mode by holding volume up button and pressing power button
(Note: The screen will stay off in RCM Mode, if it boots by doing this then the RCM Jig didnt make good enought contact with the pins on joycon rail)
Once in RCM Mode, connect your Switch to your PC using a USB
Tegra RCM Payload menu should say RCM OK, Select Inject payload.
Now you will be booting into Hekate Nyx
In Hekate first go to tools and select "Partition SD Card"
Move the Emummc(RAW) slider to 29Full
And select next step to partition.
Now, in tools tab go to USB Tools
And select sd card
Connect ur switch to PC using a USB Cable and move the contents of "After" folder into sd card root
your SD cards root should look like this
Do not delete any new files that are not in picture
Go to home menu and select Emummc
select create emummc
SD Partition, and then part 1
This will take some time so wait.
Finally its complete,
Now in home menu, select the "Launch" option and boot into your desired CFW setting
Move the .nro file into the switch folder in your SD card
- Some homebrew require extra files, in that case, move the contents of zip folder of homebrew into root of SD card
If you want a simple Homebrew pack to start off your modding journey, you can try out Essential-NX.
I am NOT, in any way, responsible for any damage (or ban) done to your switch if you use this Modpack.
- CTCaer for the creation of Hekate-Nyx
- Atmosphere-NX for the creation of Atmosphere
- Impeeza for the creation of Sys-Patches
- XorTroll for the creation of Goldleaf
- Saneki for the creatiion of LockPickRCM.
- Switchbrew for the creation of NX-HBmenu
- Switch Modding Guide for an in depth explaination of modding your switch