Skip to content

ci(deps): bump the github-actions group across 1 directory with 9 updates#24

Open
dependabot[bot] wants to merge 1 commit into
mainfrom
dependabot/github_actions/dot-github/workflows/github-actions-e032c71f9c
Open

ci(deps): bump the github-actions group across 1 directory with 9 updates#24
dependabot[bot] wants to merge 1 commit into
mainfrom
dependabot/github_actions/dot-github/workflows/github-actions-e032c71f9c

Conversation

@dependabot
Copy link
Copy Markdown
Contributor

@dependabot dependabot Bot commented on behalf of github Apr 13, 2026

Bumps the github-actions group with 9 updates in the /.github/workflows directory:

Package From To
step-security/harden-runner 2.14.0 2.17.0
actions/checkout 6.0.1 6.0.2
step-security/paths-filter 3.0.5 4.0.1
step-security/mise-action 3.4.1 3.6.2
step-security/rust-cache 2.8.2 2.8.3
codecov/codecov-action 5.5.2 6.0.0
github/codeql-action 4.31.9 4.35.1
step-security/action-gh-release 2.4.2 2.6.1
actions/dependency-review-action 4.8.2 4.9.0

Updates step-security/harden-runner from 2.14.0 to 2.17.0

Release notes

Sourced from step-security/harden-runner's releases.

v2.17.0

What's Changed

Policy Store Support

Added use-policy-store and api-key inputs to fetch security policies directly from the StepSecurity Policy Store. Policies can be defined and attached at the workflow, repo, org, or cluster (ARC) level, with the most granular policy taking precedence. This is the preferred method over the existing policy input which requires id-token: write permission. If no policy is found in the store, the action defaults to audit mode.

Full Changelog: step-security/harden-runner@v2.16.1...v2.17.0

v2.16.1

What's Changed

Enterprise tier: Added support for direct IP addresses in the allow list Community tier: Migrated Harden Runner telemetry to a new endpoint

Full Changelog: step-security/harden-runner@v2.16.0...v2.16.1

v2.16.0

What's Changed

  • Updated action.yml to use node24
  • Security fix: Fixed a medium severity vulnerability where the egress block policy could be bypassed via DNS over HTTPS (DoH) by proxying DNS queries through a permitted resolver, allowing data exfiltration even with a restrictive allowed-endpoints list. This issue only affects the Community Tier; the Enterprise Tier is not affected. See GHSA-46g3-37rh-v698 for details.
  • Security fix: Fixed a medium severity vulnerability where the egress block policy could be bypassed via DNS queries over TCP to external resolvers, allowing outbound network communication that evades configured network restrictions. This issue only affects the Community Tier; the Enterprise Tier is not affected. See GHSA-g699-3x6g-wm3g for details.

Full Changelog: step-security/harden-runner@v2.15.1...v2.16.0

v2.15.1

What's Changed

Full Changelog: step-security/harden-runner@v2.15.0...v2.15.1

v2.15.0

What's Changed

Windows and macOS runner support

We are excited to announce that Harden Runner now supports Windows and macOS runners, extending runtime security beyond Linux for the first time.

Insights for Windows and macOS runners will be displayed in the same consistent format you are already familiar with from Linux runners, giving you a unified view of runtime activity across all platforms.

Full Changelog: step-security/harden-runner@v2.14.2...v2.15.0

v2.14.2

What's Changed

Security fix: Fixed a medium severity vulnerability where outbound network connections using sendto, sendmsg, and sendmmsg socket system calls could bypass audit logging when using egress-policy: audit. This issue only affects the Community Tier in audit mode; block mode and Enterprise Tier were not affected. See GHSA-cpmj-h4f6-r6pq for details.

Full Changelog: step-security/harden-runner@v2.14.1...v2.14.2

v2.14.1

What's Changed

... (truncated)

Commits

Updates actions/checkout from 6.0.1 to 6.0.2

Release notes

Sourced from actions/checkout's releases.

v6.0.2

What's Changed

Full Changelog: actions/checkout@v6.0.1...v6.0.2

Changelog

Sourced from actions/checkout's changelog.

Changelog

v6.0.2

v6.0.1

v6.0.0

v5.0.1

v5.0.0

v4.3.1

v4.3.0

v4.2.2

v4.2.1

v4.2.0

v4.1.7

v4.1.6

... (truncated)

Commits
  • de0fac2 Fix tag handling: preserve annotations and explicit fetch-tags (#2356)
  • 064fe7f Add orchestration_id to git user-agent when ACTIONS_ORCHESTRATION_ID is set (...
  • See full diff in compare view

Updates step-security/paths-filter from 3.0.5 to 4.0.1

Release notes

Sourced from step-security/paths-filter's releases.

v4.0.1

What's Changed

Full Changelog: step-security/paths-filter@v3...v4.0.1

Commits
  • 5c5241b Merge pull request #243 from step-security/feat/update-subscription-check
  • 4a740b4 claude comments addressed
  • c3c4a64 feat: added banner and update subscription check to make maintained actions f...
  • e7a5f27 Merge pull request #241 from step-security/auto-cherry-pick
  • 81a12d9 chore: Cherry-picked changes from upstream for conflicting changes
  • 8f54c5a feat: add merge_group event support
  • 6a7c5d6 Merge pull request #240 from step-security/auto-cherry-pick
  • c79c47b chore: Cherry-picked changes from upstream in package.json
  • 000dc59 feat: update action runtime to node24
  • 60b52a2 Merge pull request #236 from step-security/auto-cherry-pick
  • Additional commits viewable in compare view

Updates step-security/mise-action from 3.4.1 to 3.6.2

Release notes

Sourced from step-security/mise-action's releases.

v3.6.2

What's Changed

Full Changelog: step-security/mise-action@v3...v3.6.2

v3.6.1

What's Changed

Full Changelog: step-security/mise-action@v3...v3.6.1

v3.5.1

What's Changed

Full Changelog: step-security/mise-action@v3...v3.5.1

Commits
  • 0cfc136 Merge pull request #204 from step-security/auto-cherry-pick
  • 62b63f2 chore: Cherry-picked changes from upstream
  • 1a59a11 fix: apply code build script
  • e58f376 fix: apply code build script
  • f6a2bf3 fix: pass cwd to all exec calls in exportMiseEnv() (#390)
  • d0f9396 Merge pull request #203 from step-security/auto-cherry-pick
  • 4a36d24 chore: Cherry-picked changes from upstream
  • 5cb2ebe fix: apply code build script
  • 9c64721 fix: apply code build script
  • 17bdf40 fix: move file_hash to end of cache key template to prevent prefix matching (...
  • Additional commits viewable in compare view

Updates step-security/rust-cache from 2.8.2 to 2.8.3

Release notes

Sourced from step-security/rust-cache's releases.

v2.8.3

What's Changed

Full Changelog: step-security/rust-cache@v2...v2.8.3

Commits
  • 9be15b8 Merge pull request #266 from step-security/npm-audit-fix
  • 1f979d8 fix: apply audit fixes
  • 9cc9384 fix: apply audit fixes
  • d5cbdd1 fix: apply audit fixes
  • df0b283 Merge pull request #264 from step-security/Raj-StepSecurity-patch-6
  • b1344b1 Update multi-job-cache.yml
  • b0c7652 Merge pull request #262 from step-security/auto-cherry-pick
  • 80a7a93 Merge branch 'main' into auto-cherry-pick
  • 585fbbe Merge pull request #263 from step-security/npm-audit-fix
  • 0d5ac1d fix: apply audit fixes
  • Additional commits viewable in compare view

Updates codecov/codecov-action from 5.5.2 to 6.0.0

Release notes

Sourced from codecov/codecov-action's releases.

v6.0.0

⚠️ This version introduces support for node24 which make cause breaking changes for systems that do not currently support node24. ⚠️

What's Changed

Full Changelog: codecov/codecov-action@v5.5.4...v6.0.0

v5.5.4

This is a mirror of v5.5.2. v6 will be released which requires node24

What's Changed

Full Changelog: codecov/codecov-action@v5.5.3...v5.5.4

v5.5.3

What's Changed

Full Changelog: codecov/codecov-action@v5.5.2...v5.5.3

Changelog

Sourced from codecov/codecov-action's changelog.

v5.5.2

What's Changed

Full Changelog: https://github.com/codecov/codecov-action/compare/v5.5.1..v5.5.2

v5.5.1

What's Changed

Full Changelog: https://github.com/codecov/codecov-action/compare/v5.5.0..v5.5.1

v5.5.0

What's Changed

Full Changelog: https://github.com/codecov/codecov-action/compare/v5.4.3..v5.5.0

v5.4.3

What's Changed

Full Changelog: https://github.com/codecov/codecov-action/compare/v5.4.2..v5.4.3

v5.4.2

... (truncated)

Commits

Updates github/codeql-action from 4.31.9 to 4.35.1

Release notes

Sourced from github/codeql-action's releases.

v4.35.1

v4.35.0

v4.34.1

  • Downgrade default CodeQL bundle version to 2.24.3 due to issues with a small percentage of Actions and JavaScript analyses. #3762

v4.34.0

  • Added an experimental change which disables TRAP caching when improved incremental analysis is enabled, since improved incremental analysis supersedes TRAP caching. This will improve performance and reduce Actions cache usage. We expect to roll this change out to everyone in March. #3569
  • We are rolling out improved incremental analysis to C/C++ analyses that use build mode none. We expect this rollout to be complete by the end of April 2026. #3584
  • Update default CodeQL bundle version to 2.25.0. #3585

v4.33.0

  • Upcoming change: Starting April 2026, the CodeQL Action will skip collecting file coverage information on pull requests to improve analysis performance. File coverage information will still be computed on non-PR analyses. Pull request analyses will log a warning about this upcoming change. #3562

    To opt out of this change:

    • Repositories owned by an organization: Create a custom repository property with the name github-codeql-file-coverage-on-prs and the type "True/false", then set this property to true in the repository's settings. For more information, see Managing custom properties for repositories in your organization. Alternatively, if you are using an advanced setup workflow, you can set the CODEQL_ACTION_FILE_COVERAGE_ON_PRS environment variable to true in your workflow.
    • User-owned repositories using default setup: Switch to an advanced setup workflow and set the CODEQL_ACTION_FILE_COVERAGE_ON_PRS environment variable to true in your workflow.
    • User-owned repositories using advanced setup: Set the CODEQL_ACTION_FILE_COVERAGE_ON_PRS environment variable to true in your workflow.

  • Fixed a bug which caused the CodeQL Action to fail loading repository properties if a "Multi select" repository property was configured for the repository. #3557

  • The CodeQL Action now loads custom repository properties on GitHub Enterprise Server, enabling the customization of features such as github-codeql-disable-overlay that was previously only available on GitHub.com. #3559

  • Once private package registries can be configured with OIDC-based authentication for organizations, the CodeQL Action will now be able to accept such configurations. #3563

  • Fixed the retry mechanism for database uploads. Previously this would fail with the error "Response body object should not be disturbed or locked". #3564

  • A warning is now emitted if the CodeQL Action detects a repository property whose name suggests that it relates to the CodeQL Action, but which is not one of the properties recognised by the current version of the CodeQL Action. #3570

v4.32.6

  • Update default CodeQL bundle version to 2.24.3. #3548

v4.32.5

  • Repositories owned by an organization can now set up the github-codeql-disable-overlay custom repository property to disable improved incremental analysis for CodeQL. First, create a custom repository property with the name github-codeql-disable-overlay and the type "True/false" in the organization's settings. Then in the repository's settings, set this property to true to disable improved incremental analysis. For more information, see Managing custom properties for repositories in your organization. This feature is not yet available on GitHub Enterprise Server. #3507
  • Added an experimental change so that when improved incremental analysis fails on a runner — potentially due to insufficient disk space — the failure is recorded in the Actions cache so that subsequent runs will automatically skip improved incremental analysis until something changes (e.g. a larger runner is provisioned or a new CodeQL version is released). We expect to roll this change out to everyone in March. #3487
  • The minimum memory check for improved incremental analysis is now skipped for CodeQL 2.24.3 and later, which has reduced peak RAM usage. #3515
  • Reduced log levels for best-effort private package registry connection check failures to reduce noise from workflow annotations. #3516
  • Added an experimental change which lowers the minimum disk space requirement for improved incremental analysis, enabling it to run on standard GitHub Actions runners. We expect to roll this change out to everyone in March. #3498
  • Added an experimental change which allows the start-proxy action to resolve the CodeQL CLI version from feature flags instead of using the linked CLI bundle version. We expect to roll this change out to everyone in March. #3512
  • The previously experimental changes from versions 4.32.3, 4.32.4, 3.32.3 and 3.32.4 are now enabled by default. #3503, #3504

v4.32.4

  • Update default CodeQL bundle version to 2.24.2. #3493
  • Added an experimental change which improves how certificates are generated for the authentication proxy that is used by the CodeQL Action in Default Setup when private package registries are configured. This is expected to generate more widely compatible certificates and should have no impact on analyses which are working correctly already. We expect to roll this change out to everyone in February. #3473
  • When the CodeQL Action is run with debugging enabled in Default Setup and private package registries are configured, the "Setup proxy for registries" step will output additional diagnostic information that can be used for troubleshooting. #3486
  • Added a setting which allows the CodeQL Action to enable network debugging for Java programs. This will help GitHub staff support customers with troubleshooting issues in GitHub-managed CodeQL workflows, such as Default Setup. This setting can only be enabled by GitHub staff. #3485
  • Added a setting which enables GitHub-managed workflows, such as Default Setup, to use a nightly CodeQL CLI release instead of the latest, stable release that is used by default. This will help GitHub staff support customers whose analyses for a given repository or organization require early access to a change in an upcoming CodeQL CLI release. This setting can only be enabled by GitHub staff. #3484

v4.32.3

  • Added experimental support for testing connections to private package registries. This feature is not currently enabled for any analysis. In the future, it may be enabled by default for Default Setup. #3466

... (truncated)

Changelog

Sourced from github/codeql-action's changelog.

CodeQL Action Changelog

See the releases page for the relevant changes to the CodeQL CLI and language packs.

[UNRELEASED]

  • The undocumented TRAP cache cleanup feature that could be enabled using the CODEQL_ACTION_CLEANUP_TRAP_CACHES environment variable is deprecated and will be removed in May 2026. If you are affected by this, we recommend disabling TRAP caching by passing the trap-caching: false input to the init Action. #3795
  • The Git version 2.36.0 requirement for improved incremental analysis now only applies to repositories that contain submodules. #3789
  • Python analysis on GHES no longer extracts the standard library, relying instead on models of the standard library. This should result in significantly faster extraction and analysis times, while the effect on alerts should be minimal. #3794
  • Fixed a bug in the validation of OIDC configurations for private registries that was added in CodeQL Action 4.33.0 / 3.33.0. #3807

4.35.1 - 27 Mar 2026

4.35.0 - 27 Mar 2026

4.34.1 - 20 Mar 2026

  • Downgrade default CodeQL bundle version to 2.24.3 due to issues with a small percentage of Actions and JavaScript analyses. #3762

4.34.0 - 20 Mar 2026

  • Added an experimental change which disables TRAP caching when improved incremental analysis is enabled, since improved incremental analysis supersedes TRAP caching. This will improve performance and reduce Actions cache usage. We expect to roll this change out to everyone in March. #3569
  • We are rolling out improved incremental analysis to C/C++ analyses that use build mode none. We expect this rollout to be complete by the end of April 2026. #3584
  • Update default CodeQL bundle version to 2.25.0. #3585

4.33.0 - 16 Mar 2026

  • Upcoming change: Starting April 2026, the CodeQL Action will skip collecting file coverage information on pull requests to improve analysis performance. File coverage information will still be computed on non-PR analyses. Pull request analyses will log a warning about this upcoming change. #3562

    To opt out of this change:

    • Repositories owned by an organization: Create a custom repository property with the name github-codeql-file-coverage-on-prs and the type "True/false", then set this property to true in the repository's settings. For more information, see Managing custom properties for repositories in your organization. Alternatively, if you are using an advanced setup workflow, you can set the CODEQL_ACTION_FILE_COVERAGE_ON_PRS environment variable to true in your workflow.
    • User-owned repositories using default setup: Switch to an advanced setup workflow and set the CODEQL_ACTION_FILE_COVERAGE_ON_PRS environment variable to true in your workflow.
    • User-owned repositories using advanced setup: Set the CODEQL_ACTION_FILE_COVERAGE_ON_PRS environment variable to true in your workflow.

  • Fixed a bug which caused the CodeQL Action to fail loading repository properties if a "Multi select" repository property was configured for the repository. #3557

  • The CodeQL Action now loads custom repository properties on GitHub Enterprise Server, enabling the customization of features such as github-codeql-disable-overlay that was previously only available on GitHub.com. #3559

  • Once private package registries can be configured with OIDC-based authentication for organizations, the CodeQL Action will now be able to accept such configurations. #3563

  • Fixed the retry mechanism for database uploads. Previously this would fail with the error "Response body object should not be disturbed or locked". #3564

  • A warning is now emitted if the CodeQL Action detects a repository property whose name suggests that it relates to the CodeQL Action, but which is not one of the properties recognised by the current version of the CodeQL Action. #3570

4.32.6 - 05 Mar 2026

  • Update default CodeQL bundle version to 2.24.3. #3548

4.32.5 - 02 Mar 2026

... (truncated)

Commits
  • c10b806 Merge pull request #3782 from github/update-v4.35.1-d6d1743b8
  • c5ffd06 Update changelog for v4.35.1
  • d6d1743 Merge pull request #3781 from github/henrymercer/update-git-minimum-version
  • 65d2efa Add changelog note
  • 2437b20 Update minimum git version for overlay to 2.36.0
  • ea5f719 Merge pull request #3775 from github/dependabot/npm_and_yarn/node-forge-1.4.0
  • 45ceeea Merge pull request #3777 from github/mergeback/v4.35.0-to-main-b8bb9f28
  • 24448c9 Rebuild
  • 7c51060 Update changelog and version after v4.35.0
  • b8bb9f2 Merge pull request #3776 from github/update-v4.35.0-0078ad667
  • Additional commits viewable in compare view

Updates step-security/action-gh-release ...

Description has been truncated

@dependabot
ci(deps): bump the github-actions group across 1 directory with 9 upd…
d9c321c 
…ates

Bumps the github-actions group with 9 updates in the /.github/workflows directory:

| Package | From | To |
| --- | --- | --- |
| [step-security/harden-runner](https://github.com/step-security/harden-runner) | `2.14.0` | `2.17.0` |
| [actions/checkout](https://github.com/actions/checkout) | `6.0.1` | `6.0.2` |
| [step-security/paths-filter](https://github.com/step-security/paths-filter) | `3.0.5` | `4.0.1` |
| [step-security/mise-action](https://github.com/step-security/mise-action) | `3.4.1` | `3.6.2` |
| [step-security/rust-cache](https://github.com/step-security/rust-cache) | `2.8.2` | `2.8.3` |
| [codecov/codecov-action](https://github.com/codecov/codecov-action) | `5.5.2` | `6.0.0` |
| [github/codeql-action](https://github.com/github/codeql-action) | `4.31.9` | `4.35.1` |
| [step-security/action-gh-release](https://github.com/step-security/action-gh-release) | `2.4.2` | `2.6.1` |
| [actions/dependency-review-action](https://github.com/actions/dependency-review-action) | `4.8.2` | `4.9.0` |



Updates `step-security/harden-runner` from 2.14.0 to 2.17.0
- [Release notes](https://github.com/step-security/harden-runner/releases)
- [Commits](step-security/harden-runner@20cf305...f808768)

Updates `actions/checkout` from 6.0.1 to 6.0.2
- [Release notes](https://github.com/actions/checkout/releases)
- [Changelog](https://github.com/actions/checkout/blob/main/CHANGELOG.md)
- [Commits](actions/checkout@8e8c483...de0fac2)

Updates `step-security/paths-filter` from 3.0.5 to 4.0.1
- [Release notes](https://github.com/step-security/paths-filter/releases)
- [Commits](step-security/paths-filter@6eee183...5c5241b)

Updates `step-security/mise-action` from 3.4.1 to 3.6.2
- [Release notes](https://github.com/step-security/mise-action/releases)
- [Commits](step-security/mise-action@2fa1b2b...0cfc136)

Updates `step-security/rust-cache` from 2.8.2 to 2.8.3
- [Release notes](https://github.com/step-security/rust-cache/releases)
- [Commits](step-security/rust-cache@f8fba70...9be15b8)

Updates `codecov/codecov-action` from 5.5.2 to 6.0.0
- [Release notes](https://github.com/codecov/codecov-action/releases)
- [Changelog](https://github.com/codecov/codecov-action/blob/main/CHANGELOG.md)
- [Commits](codecov/codecov-action@671740a...57e3a13)

Updates `github/codeql-action` from 4.31.9 to 4.35.1
- [Release notes](https://github.com/github/codeql-action/releases)
- [Changelog](https://github.com/github/codeql-action/blob/main/CHANGELOG.md)
- [Commits](github/codeql-action@5d4e8d1...c10b806)

Updates `step-security/action-gh-release` from 2.4.2 to 2.6.1
- [Release notes](https://github.com/step-security/action-gh-release/releases)
- [Commits](step-security/action-gh-release@5f6a6ab...dc29ef0)

Updates `actions/dependency-review-action` from 4.8.2 to 4.9.0
- [Release notes](https://github.com/actions/dependency-review-action/releases)
- [Commits](actions/dependency-review-action@3c4e3dc...2031cfc)

---
updated-dependencies:
- dependency-name: step-security/harden-runner
  dependency-version: 2.17.0
  dependency-type: direct:production
  update-type: version-update:semver-minor
  dependency-group: github-actions
- dependency-name: actions/checkout
  dependency-version: 6.0.2
  dependency-type: direct:production
  update-type: version-update:semver-patch
  dependency-group: github-actions
- dependency-name: step-security/paths-filter
  dependency-version: 4.0.1
  dependency-type: direct:production
  update-type: version-update:semver-major
  dependency-group: github-actions
- dependency-name: step-security/mise-action
  dependency-version: 3.6.2
  dependency-type: direct:production
  update-type: version-update:semver-minor
  dependency-group: github-actions
- dependency-name: step-security/rust-cache
  dependency-version: 2.8.3
  dependency-type: direct:production
  update-type: version-update:semver-patch
  dependency-group: github-actions
- dependency-name: codecov/codecov-action
  dependency-version: 6.0.0
  dependency-type: direct:production
  update-type: version-update:semver-major
  dependency-group: github-actions
- dependency-name: github/codeql-action
  dependency-version: 4.35.1
  dependency-type: direct:production
  update-type: version-update:semver-minor
  dependency-group: github-actions
- dependency-name: step-security/action-gh-release
  dependency-version: 2.6.1
  dependency-type: direct:production
  update-type: version-update:semver-minor
  dependency-group: github-actions
- dependency-name: actions/dependency-review-action
  dependency-version: 4.9.0
  dependency-type: direct:production
  update-type: version-update:semver-minor
  dependency-group: github-actions
...

Signed-off-by: dependabot[bot] <support@github.com>
@dependabot dependabot Bot added area/ci CI/CD area/deps Dependencies labels Apr 13, 2026
@github-actions github-actions Bot added area/config Configuration and removed area/deps Dependencies labels Apr 13, 2026
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment

Reviewers

No reviews

Assignees

No one assigned

Labels

area/ci CI/CD area/config Configuration

Projects

None yet

Milestone

No milestone

Development

Successfully merging this pull request may close these issues.

0 participants