[pull] master from coolsnowwolf:master - #1
Open
pull[bot] wants to merge 5656 commits into
Open
Conversation
coolsnowwolf
force-pushed
the
master
branch
2 times, most recently
from
December 30, 2021 16:37
bd79a2b to
bcad74f
Compare
aiamadeus
force-pushed
the
master
branch
2 times, most recently
from
July 10, 2022 07:51
3526137 to
8845cb4
Compare
coolsnowwolf
force-pushed
the
master
branch
3 times, most recently
from
July 11, 2022 08:42
b82c84a to
c50a2c3
Compare
aiamadeus
force-pushed
the
master
branch
4 times, most recently
from
September 1, 2022 04:06
115d673 to
b477a0b
Compare
coolsnowwolf
force-pushed
the
master
branch
3 times, most recently
from
September 1, 2022 17:31
073fdc3 to
5d87cf5
Compare
aiamadeus
force-pushed
the
master
branch
2 times, most recently
from
September 12, 2022 16:19
420f56a to
d91aa7c
Compare
coolsnowwolf
force-pushed
the
master
branch
2 times, most recently
from
September 22, 2022 05:37
a6eeaee to
4f056f8
Compare
Release 2.11 has been quite a few new features and fixes since the 2.10 release. Fixes: #14096 Signed-off-by: Ivan Pavlov <AuthorReflex@gmail.com> Signed-off-by: Robert Marko <robimarko@gmail.com>
In tree ksmbd is available with 5.15 and is better updated. Signed-off-by: Rosen Penev <rosenp@gmail.com>
68f382690bfa statefiles: escape client hostnames in the lease state file Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Switch the qualcommbe target to use kernel 6.18 and drop 6.12. Kernel 6.18 for qualcommbe resolves some issues regarding PCS support and reduces maintenance load maintaining two kernel branches. Signed-off-by: Kenneth Kasilag <kenneth@kasilag.me> Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com>
The upgrade to 2.5.0 accidentally dropped the CPP defines, so the precompiled-active-filter option has been missing and the demand dialing option in uci has been broken since then. Add the missing defines. Fixes: 9cecf2b ("ppp: update to 2.5.0") Signed-off-by: Qingfang Deng <dqfext@gmail.com> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Upstream moved the airoha ethernet driver into its own folder, so the patches predating the move were retargeted to drivers/net/ethernet/airoha. Manually rebased: airoha/patches-6.12/016-v6.13-net-airoha-Fix-EGRESS_RATE_METER_EN_MASK-definition.patch airoha/patches-6.12/031-02-v6.13-net-airoha-Simplify-Tx-napi-logic.patch airoha/patches-6.12/036-v6.13-net-airoha-Fix-typo-in-REG_CDM2_FWD_CFG-configuratio.patch airoha/patches-6.12/038-01-v6.14-net-airoha-Enable-Tx-drop-capability-for-each-Tx-DMA.patch airoha/patches-6.12/038-04-v6.14-net-airoha-Add-sched-HTB-offload-support.patch airoha/patches-6.12/039-v6.14-net-airoha-Enforce-ETS-Qdisc-priomap.patch airoha/patches-6.12/046-v6.15-net-airoha-Fix-TSO-support-for-header-cloned-skbs.patch airoha/patches-6.12/047-v6.13-net-airoha-Reset-BQL-stopping-the-netdevice.patch bcm27xx/patches-6.12/950-0006-xhci-add-quirk-for-host-controllers-that-don-t-updat.patch bcm27xx/patches-6.12/950-0333-xhci-quirks-add-link-TRB-quirk-for-VL805.patch bcm27xx/patches-6.12/950-0334-usb-xhci-add-VLI_SS_BULK_OUT_BUG-quirk.patch bcm27xx/patches-6.12/950-0335-usb-xhci-add-XHCI_VLI_HUB_TT_QUIRK.patch Removed upstreamed: airoha/patches-6.12/048-01-v6.15-net-airoha-Move-airoha_eth-driver-in-a-dedicated-fol.patch generic/backport-6.12/620-v6.15-ppp-use-IFF_NO_QUEUE-in-virtual-interfaces.patch All other patches automatically rebased.
Added 100-gcc15-fix.patch which drops __DATE__/__TIME__ usage and provides
a stable fallback ("unknown"). This fixes build failures with GCC 15 and
-Werror=date-time in kernel builds.
Signed-off-by: John Audia <therealgraysky@proton.me>
[Removed "Replace printk with pr_* macros" patch]
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Mario Andrés Pérez <mapb_@outlook.com> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Manually rebased: generic/pending-6.12/804-nvmem-core-support-mac-base-fixed-layout-cells.patch generic/pending-6.12/809-01-nvmem-core-generalize-mac-base-cells-handling.patch Removed upstreamed: generic/backport-6.12/429-01-v6.18-mtd-spinand-fix-direct-mapping-creation-sizes.patch generic/backport-6.12/429-02-v6.18-mtd-spinand-try-a-regular-dirmap-if-creating-a-di.patch generic/backport-6.12/429-03-v6.18-mtd-spinand-repeat-reading-in-regular-mode-if-con.patch All other patches automatically rebased.
Use Rockchip's rkbin DDR loader for King3399 and package the board image with the corresponding miniloader, U-Boot, and trust image layout. This avoids the incompatible open-source LPDDR initialization profile that fails DRAM training on the board.
Enable CONFIG_NVMEM_BLOCK to support block devices in dts, used for reading nvmem. Signed-off-by: Andrew LaMarche <andrewjlamarche@gmail.com>
This commit adds support for Askey SBE1V1K. Device specification -------------------- SoC: Qualcomm IPQ9570 RAM: Micron (2GB) Flash: 8GB eMMC Ethernet: 1x 10G RTL8261BE 1x 2.5G QCA8081 2x 1G QCA8075 Wi-Fi: QCN6214 2.4GHz 4x4 QCN6274 5GHz 4x4 QCN6274 6GHz 4x4 LEDs: 1 LED, power/status Buttons: 1 reset USB ports: none Bootloader: U-Boot 1.0.9 [spf12.2_CSU2] (Jun 28 2024 - 17:47:10 +0000) Installation (serial required): **NOTE** This procedure requires glitching the eMMC. It is very possible that you may damage or corrupt your bootloader in doing so. Proceed with caution, and always make a full eMMC backup! **NOTE** If the bootloader has trouble accessing eMMC due to glitching it, any U-Boot env updates are written directly to the start of flash, overwriting the bootloader. For this reason, it is strongly NOT recommended to make any persistent U-Boot env changes from U-Boot itself; do this in Linux. - Open the chasis and connect to the serial port. - While booting, short eMMC CLK to UART VCC during FIT image load to enter U-Boot. - setenv ipaddr 192.168.1.1 - setenv serverip 192.168.1.2 **NOTE** DO NOT SAVE THE ENV - Set your PC IP address to 192.168.1.2 and host the initramfs on a tftp server. - tftpboot 0x44000000 initramfs.itb - bootm 0x44000000 If you get an error and it reboots, try loading to 0x80000000. In the initramfs: - fw_setenv bootargs 'console=ttyMSM0,115200n8 rootwait root=/dev/mmcblk0p27' - fw_setenv bootcmd 'echo "Hit ctrl+c for shell..."; if sleep 3; then run do_boot; else do_nothing; fi;' - fw_setenv do_boot 'mmc read 0x44000000 0x00014022 0x3800; bootm 0x44000000' - Install a sysupgrade U-Boot hardcodes the bootargs to reset on each boot, which is why it is necessary for the bootcmd to override them. Thankfully, the vendor did not bother to secure U-Boot any further. As long as the vendor software does not boot, the U-Boot env will stay. If a vendor image boots, the U-Boot env will revert to default. The vendor U-Boot also ignores bootdelay, which is why we add a dummy sleep to allow the user time to drop into a shell without needing to glitch any more. Co-authored-by: Kenneth Kasilag <kenneth@kasilag.me> Signed-off-by: Andrew LaMarche <andrewjlamarche@gmail.com>
Drop source-only from qualcommbe target as we have some supported devices now. Signed-off-by: Andrew LaMarche <andrewjlamarche@gmail.com>
Sync the qca-wireless source revision and add the Askey SBE1V1K QCN9274 board data from firmware_qca-wireless PR #123. Signed-off-by: coolsnowwolf <coolsnowwolf@gmail.com>
Signed-off-by: coolsnowwolf <coolsnowwolf@gmail.com>
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
20 participants
Add this suggestion to a batch that can be applied as a single commit.This suggestion is invalid because no changes were made to the code.Suggestions cannot be applied while the pull request is closed.Suggestions cannot be applied while viewing a subset of changes.Only one suggestion per line can be applied in a batch.Add this suggestion to a batch that can be applied as a single commit.Applying suggestions on deleted lines is not supported.You must change the existing code in this line in order to create a valid suggestion.Outdated suggestions cannot be applied.This suggestion has been applied or marked resolved.Suggestions cannot be applied from pending reviews.Suggestions cannot be applied on multi-line comments.Suggestions cannot be applied while the pull request is queued to merge.Suggestion cannot be applied right now. Please check back later.
See Commits and Changes for more details.
Created by
pull[bot] (v2.0.0-alpha.4)
Can you help keep this open source service alive? 💖 Please sponsor : )